Nickel-Chromium wire is also named nichrome, a non-magnetic alloy of nickel and chromium. The alloy is diversified to accommodate various applications. Xinxing Nickel Wire Mesh Factory mainly produces two kind nickel chromium alloys:
Nickel-chrome 8020: alloy with 80%nickel/ 20%chromium
Nickel-chrome 60: alloy with 60%nickel/ 16%chromium (Balance Iron)
we manufacture:
Nickel-chromium wire (80%nickel/ 20%chromium OR 60%nickel/ 16%chromium)
(Featured Products, always in store):
Available models: round wire, spools available and length according to your requirement; Diameter: 0.05mm--9.0mm
Nickel-chromium wire mesh (80% nickel/ 20%chromium)
(Featured Products, always in store):
Available models: 20mesh/inch--200mesh/inch, 30meters long and 1meter wide or to your special requirement.
Nickel-chromium Ribbon (80%nickel/ 20%chromium OR 60% nickel/ 16%chromium):
Available models: strip, spools available and length according to your requirement; width and thickness: to your requirement.
Nickel chromium alloy 80/20: an ideal material, because it has relatively high resistance and forms an adherent layer of chromium oxide when it is heated for the first time. Material beneath the wire will not oxidize, preventing the wire from breaking or burning out. So it is good for anti-corrosion and high resistant co-efficiency. So it is applicable for heat treatment, air-carbon furnace, chemical industry, machinery, metallurgy. The wire is commonly used in ceramics as an internal support structure.
Nickel-chromium wire mesh (80% nickel/ 20%chromium): This kind of mesh is weaved with nickel-chromium wire, and mainly in alloy 80/20. It is very suitable to be used in electronic parts and components industry as the electronic components’ carrier in the baking procedure. It is also widely used in chemical industry.
Nickel-Chrome 60: as resistance wire, it is an accepted material for heating devices operating up to 1000 centigrade (1850F). This encompasses most pluggable power cord domestic heating appliances and those heating units of medium temperatures which do not require the unsurpassed quality of NI/CR-80/20, the 80-20 alloy.
Chemical composition
type |
Chemical composition |
C |
Mn |
P |
S |
Al |
Si |
Ni |
Cr |
Cu |
Fe |
< or = |
6J20 |
0.05 |
0.70 |
0.010 |
0.0l0 |
0.30 |
0.40--1.30 |
left |
20.0--23.0 |
|
<1.50 |
6J15 |
0.05 |
1.50 |
0.030 |
0.020 |
0.30 |
0.40--1.30 |
55.0--61.0 |
15.0--18.0 |
|
left |
6J10 |
0.05 |
0.30 |
0.010 |
0.010 |
|
<=0.20 |
Ni+Co(left) |
9.0--10.0 |
<=0.2 |
<=0.40 |
Alloy 600
Chemical Composition %
| C |
Cr |
Cu |
Fe |
Mg |
N |
S |
Si |
| Max |
|
Max |
|
Max |
Min |
Max |
Max |
| 0.15 |
14.0-17.0 |
0.50 |
6.00-10.00 |
1.00 |
72.0 |
0.015 |
0.50 |
Detailed Selling Lead Description High
The company can help:Select suitable component material with proper type. Providing instant installed components. Improve performance for furnace/boiler for better economic achievement.
The company owns advanced workshop and equipment with experience in producing thermal components, and can make components of all specs.The company provides fast delivery and high-level service.
If you have any inquiry, please contact the factory director, Mr. Zhao for our most competitive quotations.
|
